Material Feeding
Coarse-grained and dirty material is fed into the system.
Screening & Classification Systems
Log Washer
Heavy-duty cleaning for dense and sticky materials.
Process-focused selection
Engineered based on product and site data
Material
Carbon steel, stainless steel, or a special coating
Capacity
Defined according to project capacity
Commissioning
Installation, operator handover, maintenance planning, and after-sales support are coordinated.
PROCESS EQUIPMENT
Process-oriented selection for LOG WASHER SYSTEMS
Miyay Proses Log Washer Systems are heavy-duty mechanical washing equipment that ensure effective washing of muddy, coarse-grained solid materials with high contamination levels. With the help of spiral paddles mounted on counter-rotating helical shafts, the material is conveyed under intensive water contact and separated from sticky residues such as mud, clay and organic contaminants by the effect of physical friction. Thanks to high-volume water use and its low-speed but powerful mechanical movement, it provides maximum cleaning efficiency even under the most demanding process conditions.
- Effective Washing of Coarse and Sticky Materials
- Low Speed and High Torque Performance
- Heavy-Duty and Durable Design
KEY FEATURES
Heavy-duty mechanical structure
Counter-flow water system
Low speed and high torque
Automatic discharge system
Modular trough and body design
High cleaning efficiency
Key Features and Advantages
The heavy-duty mechanical structure, with a drive that generates high torque at low speed, washes high-density and sticky material within a counter-flow water system. The modular trough and body design together with the automatic discharge system maintain cleaning efficiency while facilitating maintenance access.
Optional equipment
- Cyclone or decanter integration
- Wear-resistant inner linings
- Special sealed bearing system
- Field-extendable body structure
- Closed system application
OPERATING PRINCIPLE
LOG WASHER SYSTEMS Working Principle and Process Steps
Mechanical Washing
Helical shafts and spiral paddles bring the material into contact with water.
Separation of Contaminants
Mud, clay and sticky contaminants are separated by the effect of friction.
Cleaning and Discharge
As the cleaned material advances, the separated contaminants are discharged from the system.
TECHNICAL SPECIFICATIONS
LOG WASHER SYSTEMS technical data table
| Parameter | Value |
|---|---|
| Operating Type | heavy duty |
| Shaft Design | Twin-spiral Log Washer shaft |
| Gear System | Heat treated helical gear |
| Wear parts | Replaceable two-piece manganese casting / Hardox |
| Washing System | Rinse sprays |
| Main Water Inlet | Water check valve |
| Bearing Design | Heavy duty oversized bearings |
| Drive System | V-belt / twin shaft |
| Geared motor | Yılmaz / Bonfiglioli / Brevini / Nord, etc. |
| Washing Trough | Sealed, heavy-duty design |
| Frame | Reinforced steel frame |
| Frame Angle | 6–20° adjustable |
| Fasteners | 10.9 quality,vibration resistant bolts |
| Sealing | Water seals |
| Body Structure | Modular / field-expandable |
| Working Performance | Low speed / high torque |
MODEL AND CAPACITY OPTIONS
LOG WASHER SYSTEMS Model and Size Selection Table
| Model | Log Diameter (in) | Trough Length (in) | Maximum Material Size (in) | Speed (rpm) | Capacity (t/h) | Water Flow (m³) | Quote |
|---|---|---|---|---|---|---|---|
| KTK-2420 | 24" | 20" | 2" | 40 | 30–60 | 13–70 | Request a quote |
| KTK-3625 | 36" | 25" | 3" | 33 | 50–125 | 13–120 | Request a quote |
| KTK-3630 | 36" | 30" | 3" | 33 | 50–125 | 13–120 | Request a quote |
| KTK-3635 | 36" | 35" | 3" | 33 | 50–125 | 13–120 | Request a quote |
| KTK-3830 | 38" | 30" | 2.5" | 30 | 60–140 | 13–125 | Request a quote |
| KTK-3835 | 38" | 35" | 2.5" | 30 | 60–140 | 13–125 | Request a quote |
| KTK-4425 | 44" | 25" | 4" | 26 | 75–175 | 18–170 | Request a quote |
| KTK-4430 | 44" | 30" | 4" | 26 | 75–175 | 18–170 | Request a quote |
| KTK-4435 | 44" | 35" | 4" | 26 | 75–175 | 18–170 | Request a quote |
| KTK-4630 | 46" | 30" | 3.5" | 24 | 75–190 | 18–180 | Request a quote |
| KTK-4635 | 46" | 35" | 3.5" | 24 | 75–190 | 18–180 | Request a quote |
SPARE PARTS
Spare parts
Critical spare parts for operational continuity
01
MPS-SP-01
Spiral paddles
02
MPS-SP-02
Helical shafts
03
MPS-SP-03
Bearings and bearing housings
PRODUCT GALLERY
Equipment Details and Field Photos
1 / 2
REQUEST A QUOTE
REQUEST A QUOTE
Log Washer — Share your capacity and process requirements
Share your capacity, material, and process requirements so our engineering team can assess the right configuration.