Material enters the gate
Bulk material is directed from the process line to the inlet of the slide gate.
Material Handling and Storage Systems
Slide Gates
Reliable solution for controlled opening and closing of bulk-material flow
Process-focused selection
Engineered based on product and site data
Material
Carbon steel, stainless steel, or a special coating
Capacity
Defined according to project capacity
Commissioning
Installation, operator handover, maintenance planning, and after-sales support are coordinated.
PROCESS EQUIPMENT
Process-focused selection for Slide Gates
MIYAY Process Slide Gates are designed to control the flow, feeding, and transfer of dry, free-flowing, abrasive, and difficult bulk materials. They can also be used on transfer equipment such as rotary feeders and screw conveyors for maintenance, repair, or emergency shutoff. They can be manufactured with round or rectangular flanges and a welded or bolted construction.
- Controlled Material Flow
- Process-Specific Design and Manufacturing
WHY MIYAY PROCESS?
- Process-specific dimensions and design
- Options for different housing and blade materials
- Manual, pneumatic, or electric actuator drive
- Continuous material flow in the fully open position
- Effective sealing design
- Easy installation, maintenance, and operation
THE RIGHT SOLUTION FOR YOUR PROCESS
Every process differs in material properties, connection dimensions, operating conditions, and control requirements. MIYAY Process sizes Slide Gates to meet these requirements and selects the housing, blade, lining, and drive system for each application. Square, rectangular, or circular designs can be supplied to suit different process connections.
HIGHLIGHTED FEATURES
Uninterrupted material flow when fully open
Effective sealing system
Jamming-resistant design
Open and Closed Position Information
Robust bearing system
Easy Installation, Maintenance and Operation
Process-Specific Design and Manufacturing
Highlights and Benefits
The slide gate leaves an uninterrupted material flow in the fully open position and is built to seal effectively when closed. A structure that protects against jamming, a system reporting open and closed position, and robust bearings answer maintenance and emergency shut-off needs.
Optional equipment
- Manual, pneumatic, or electric actuator drive
- Carbon-steel, AISI 304L, or AISI 316L housing
- Carbon-steel ST52, Hardox, AISI 304L, or AISI 316L blade
- EPDM or custom blade-lining options
- Square, rectangular, or circular design
- Project-Specific Dimensions and Configuration
WORKING PRINCIPLE
Slide Gates: working principle and process steps
Gate movement
A manual, pneumatic, or electric actuator moves the gate blade in the opening or closing direction.
Material-flow control
When the gate opens, material can pass; the fully open position provides continuous flow.
Closing the Flow
When the slide gate is closed, material flow stops and the sealing system closes off the line.
TECHNICAL SPECIFICATIONS
Slide Gate technical data table
| Parameter | Value |
|---|---|
| Equipment Type | Slide gate |
| Standard Dimensions | 100 – 600 mm |
| Body Material | Carbon Steel / AISI 304L / AISI 316L |
| Blade Material | ST52 / Hardox / AISI 304L / AISI 316L / custom |
| Wear Material | EPDM / PE1000 |
| Sealing | O-ring |
| Drive Type | Manual / pneumatic / electric actuator |
| Cross-section / connection type | Square/Rectangular/Circular |
| Bearing | SKF / FAG |
| Flow Structure | Continuous flow in the fully open position |
| Position information | On/Off |
| design | Process and project specific |
MODEL AND CAPACITY OPTIONS
Slide Gate model and size selection table
| Model | Dimensions | Body Material | Blade Material | Drive Type | Quote |
|---|---|---|---|---|---|
| MSK-150 | 150 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
| MSK-200 | 200 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
| MSK-250 | 250 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
| MSK-300 | 300 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
| MSK-350 | 350 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
| MSK-400 | 400 mm | Carbon Steel / AISI 304L / AISI 316L | ST52 / Hardox / AISI 304L / AISI 316L | Manual / Pneumatic / Electric Actuator | Request a quote |
SPARE PARTS
Spare parts
Critical spare parts for operational continuity
01
MPS-SP-01
Gate blade
02
MPS-SP-02
EPDM / PE1000 wear components
03
MPS-SP-03
O-ring sealing components
PRODUCT GALLERY
Equipment Details and Field Photos
1 / 4
REQUEST A QUOTE
REQUEST A QUOTE
Slide Gates — Share your capacity and process requirements
Share your capacity, material, and process requirements so our engineering team can assess the right configuration.