Flow Routing
The process fluid is fed into the filter body in a controlled manner and the filtration process is started.
Solid-Liquid Separation Systems
Polishing Filter Systems
Final filtration and product clarification solutions for high-purity processes. MIYAY Polishing Filter Systems remove fine particles and turbidity-causing residues at the final quality point of the process.
Process-focused selection
Engineered based on product and site data
Material
Carbon steel, stainless steel, or a special coating
Capacity
Defined according to project capacity
Commissioning
Installation, operator handover, maintenance planning, and after-sales support are coordinated.
PROCESS EQUIPMENT
Process-oriented selection for Polishing Filter Systems
MİYAY Polishing (Polish) Filter Systems are designed to remove fine particles, turbidity-causing residues and micron-level suspended solids remaining after filter presses, thickeners, decanters or other solid-liquid separation equipment. Thanks to the pressurized and fully enclosed system structure, high-clarity filtrate is obtained while product losses are minimized and process safety is increased. They serve as the final quality control point, especially in chemical, boron chemicals, fertilizer, food and advanced process applications requiring high purity.
- Obtaining clear filtrate with high filtration precision
- Efficient and reliable operation that reduces product loss
- Easy operation and low maintenance requirement
Why MİYAY?
-
Modernization of existing systems and performance improvement services
-
Supply of filter elements, automation equipment and critical spare parts
-
Process-oriented engineering approach
-
Pilot and laboratory test support
-
Production in compliance with CE standards
-
Full automation solutions
-
Global reference experience
-
After-sales technical service and spare parts support
Solution Tailored to Your Process
Every filtration process is different. MİYAY designs and commissions the polishing filter system most suitable for your process through laboratory studies, pilot tests and detailed engineering services.
KEY FEATURES
Pressurized and fully enclosed filtration system
Obtaining high-clarity filtrate
1– 25 micron filtration precision
Precoat (filter aid layer) application option
Low product loss and high product recovery
Automatic cleaning and washing systems
PLC / SCADA integration
AISI 304L, AISI 316L and Duplex material options
CIP-compatible design
Project-specific engineering solutions
Key Features and Advantages
The fully enclosed and pressurized filtration body is intended for obtaining high-clarity filtrate with precision levels between 1 and 25 microns. The precoat application option, automatic cleaning and CIP-compatible design limit product loss, and are offered together with AISI 304L, 316L and Duplex material options.
Optional equipment
- Precoat preparation and dosing system
- Automatic filter aid feeding system
- CIP integration
- Automatic differential pressure control
- ATEX-compliant design
- Remote access and SCADA integration
- Duplex and special alloy material options
OPERATING PRINCIPLE
POLISHING FILTER SYSTEMS Working Principle and Process Steps
Precision Filtration
Thanks to micron-level filter elements, fine particles are effectively retained and the product is clarified.
Clean Fluid Outlet
The filtered fluid exits the system at high purity and is transferred to the next stage of the process.
Easy Maintenance
Filter elements can be easily replaced or cleaned; the system is put back into operation in a short time.
TECHNICAL SPECIFICATIONS
POLISHING FILTER SYSTEMS technical data table
| Parameter | Value |
|---|---|
| Equipment Type | Pressure Polishing Filter |
| Filtration Rating | 0.2 – 50 Microns |
| Filtration Area | 45 – 880 m² |
| Feeding Capacity | 12 – 200 m³/h |
| Working Pressure | 1.5 – 5 bar |
| Filter Aid | Precoat Option |
| Cleaning System | Manual or Automatic |
| Automation | PLC / SCADA Compatible |
| Body Materials | AISI 304L, AISI 316L, Duplex |
| Design Standard | CE Compatible |
MODEL AND CAPACITY OPTIONS
POLISHING FILTER SYSTEMS Model and Size Selection Table
| Model Code | Filtration Area (m²) | Capacity (m³/h) | Design Pressure (bar) | Quote |
|---|---|---|---|---|
| MPS-PF-45 | 45 | 12 | 6 | Request a quote |
| MPS-PF-90 | 90 | 20 | 6 | Request a quote |
| MPS-PF-180 | 180 | 45 | 6 | Request a quote |
| MPS-PF-320 | 320 | 75 | 6 | Request a quote |
| MPS-PF-480 | 480 | 120 | 6 | Request a quote |
| MPS-PF-640 | 640 | 150 | 6 | Request a quote |
| MPS-PF-880 | 880 | 200 | 6 | Request a quote |
PRODUCT GALLERY
Equipment Details and Field Photos
1 / 13
REQUEST A QUOTE
REQUEST A QUOTE
Polishing Filter Systems — Share your capacity and process requirements
Share your capacity, material, and process requirements so our engineering team can assess the right configuration.