Product Feeding
Heat-sensitive liquid, granule, powder or solid product is fed in a controlled manner into the microwave dryer. The product is introduced into the system in continuous or batch operation mode depending on process requirements.
Industrial Drying Systems
Microwave Dryer
Low-temperature, uniform drying technology for high-value products.
Process-focused selection
Engineered based on product and site data
Material
Carbon steel, stainless steel, or a special coating
Capacity
Defined according to project capacity
Commissioning
Installation, operator handover, maintenance planning, and after-sales support are coordinated.
PROCESS EQUIPMENT
Process-oriented selection for MICROWAVE DRYER SYSTEMS
Miyay Proses Microwave Dryer Systems have been specially developed for critical products that require homogeneous drying and are heat-sensitive, where conventional heat transfer methods are insufficient. In these systems, drying is based on the principle of inside-out heating, performed by microwave energy penetrating directly into the product volume. As a result, shorter time, lower temperature and more uniform moisture distribution are achieved. Compared with conventional systems, microwave drying provides a clear advantage in preserving product functionality and active component integrity. Therefore, it is preferred in production environments requiring high-precision process control.
- Equipment selection based on capacity and product characteristics
- Plant layout and integration with auxiliary systems
- Testing, installation and after-sales technical support
WHY MİYAY?
- Process-focused microwave drying solutions for heat-sensitive products
- Product-specific power and frequency optimization
- Laboratory studies and pilot-scale process testing support
- Custom engineering solutions for vacuum microwave drying systems
- Full automation and recipe management based on PLC / SCADA / DCS
- Manufacturing in compliance with CE standards and high-safety system design
- After-sales technical service, maintenance and spare parts support
- Comprehensive spare parts supply for microwave generators, magnetrons and conveying systems
- Modernization and capacity increase services for existing microwave dryer systems
- Project-specific engineering, commissioning and process optimization support
KEY FEATURES
Volumetric and homogeneous drying with microwave energy
High drying efficiency at low temperature
Safe process for heat-sensitive products
Short drying time and high energy efficiency
Controlled moisture removal and homogeneous product quality
Continuous or batch operation options
Operation under vacuum
Recipe-based process management
PLC / SCADA integration
Modular and project-specific system design
Key Features and Advantages
Since microwave energy acts volumetrically within the product, drying proceeds at low temperature and with uniform distribution; it provides short-term, controlled moisture removal for heat-sensitive products. Continuous or batch operation, operation under vacuum, and recipe-based process management are combined in the same modular system.
Optional equipment
- Vacuum microwave drying system
- Multi-zone microwave power control
- Automatic product feeding system
- Conveyor-based continuous operation system
- Operation with nitrogen (inert gas) atmosphere
- Cooling system integration
- Moisture and temperature analysis system
- Recipe-based automation software
- Remote access and SCADA integration
- Data logging and reporting system (Data Logging)
- CIP (Clean-In-Place) cleaning system
- ATEX-compliant design options
OPERATING PRINCIPLE
MICROWAVE DRYER SYSTEMS Working Principle and Process Steps
Volumetric Microwave Heating
Microwave energy penetrates the entire product and directly excites water molecules. Thus, homogeneous and rapid heat transfer occurs starting from the internal volume of the product, not from the surface.
Controlled Drying
The generated moisture is removed from the environment by controlled airflow or a vacuum system. High drying efficiency is achieved at low process temperatures while the physical and chemical properties of the product are preserved.
Product Discharge
The product that reaches the target moisture content is discharged from the system continuously or in batch. The entire process is monitored via the PLC/SCADA system, controlled on a recipe basis, and reproducible production is ensured.
TECHNICAL SPECIFICATIONS
MICROWAVE DRYER SYSTEMS technical data table
| Feature | Value |
|---|---|
| Equipment | Microwave Dryer |
| Capacity | Defined according to project capacity |
| Process | Industrial Drying Systems |
| Delivery scope | Design, manufacturing, testing, installation, and commissioning |
SPARE PARTS
Spare parts
Critical spare parts for operational continuity
01
MPS-SP-01
Magnetron Unit
02
MPS-SP-02
Waveguide
03
MPS-SP-03
Microwave Antenna
PRODUCT GALLERY
Equipment Details and Field Photos
1 / 1
REQUEST A QUOTE
REQUEST A QUOTE
Microwave Dryer — Share your capacity and process requirements
Share your capacity, material, and process requirements so our engineering team can assess the right configuration.